中文版
ENGLISH
NJ-50T/100T anchorage force tester (pull-out instrument)
简要描述： standard: GB 50367-2013, GB 50330-2013, JGJ 120-2012, CECS 22:2005, GB 50007-2011, JGJ 145-2013, GB 50550-2010, GB 50203-2011,
产品介绍
Product Introduction
1. Application:
It is suitable for testing the anchorage force of several of anchor shank, rebar and expansion bolts, also the pull force of glass block screen wall.
2. Standard:
GB 50367-2013, GB 50330-2013, JGJ 120-2012, CECS 22:2005, GB 50007-2011, JGJ 145-2013, GB 50550-2010, GB 50203-2011,
3. Features:
1. It consists of Manual pump, Hydraulic cylinder, Digital pressure gauge, and High-pressure rubber pipe.
2. The manual pump is of High-Low pressure dual-Radial Piston design more efficient.
3. The High precision cast steel increase its life.
4. The Hydraulic cylinder adopts hollow automatic reset design. Hydraulic cylinder has handhold which connects the high pressure pipe with the two connectors. Digital pressure gauge directly shows the tension value.
5. It is featured by compact designation, portable, smaller size, and light weight.
4. Parameters
Model | NJ-50T | NJ-60T | NJ-80T | NJ-100T | |
Manual pump | Max Pressure | 63MPa(High), 2Mpa(low) | |||
Max handle pressure | 500N | ||||
Oil capacity | 3L | ||||
Weight | 12kg | ||||
Oil cylinder | Max force | 500KN | 600KN | 800KN | 1000KN |
Piston stroke: | 120mm | 120mm | 120mm | 150mm | |
Weight: | 26kg | 33kg | 42kg | 56kg | |
Central hole: | 60mm | 65mm | 75mm | 85mm | |
Digital pressure gauge | Test range | 0-500KN | 0-600KN | 0-800KN | 0-1000KN |
Power supply | 9v battery | ||||
Weight | 0.4kg | ||||
Anchorage specifications (Optional) | φ6, φ8, φ10, φ12, φ14, φ16, φ18, φ20, φ22, φ25, φ28, φ32, φ36, φ38, φ40 | ||||
Connector specifications (Optional) | M6, M8, M10, M12, M14, M16, M18, M20, M22, M24,M27, m32, m39 | ||||
