中文版
ENGLISH
NJCW-1 Integrated Load-to-Marshall Stability Tester
简要描述： 1. Maximum Rated Load: 60 kN 2. Test Speed: 1 mm/min, 12.7 mm/min, 50.8 mm/min3. Penetration Rod: End face diameter Φ50 mm. 4. Marshall Stability Indenter: φ101.6 mm5. Dial Gauge: 0–10 mm, 1 unit. 6. Test Cylinder: Inner Diameter Φ152 mm, Height 177.8 mm7. Load Measurement Ring: 1 set. 8. Total Power Consumption: 1500 W;9. Distance Between Columns: 220 mm
产品介绍
Main Technical Parameters and Specifications
1. Maximum Rated Load: 60 kN
2. Test Speed: 1 mm/min, 12.7 mm/min, 50.8 mm/min
3. Penetration Rod: End face diameter Φ50 mm.
4. Marshall Stability Indenter: φ101.6 mm
5. Dial Gauge: 0–10 mm, 1 unit.
6. Test Cylinder: Inner Diameter Φ152 mm, Height 177.8 mm
7. Load Measurement Ring: 1 set.
8. Total Power Consumption: 1500 W;
9. Distance Between Columns: 220 mm
